GENERAL
Buffalo Brick are pre-colored concrete masonry
units and should be treated with care.
RECOMMENDATIONS:
- Avoid mortar smears,
grout and concrete splashing on Buffalo
Brick.
- Use a mortar color
the same color as the unit or as the slurry.
- Dry brush at the end
of each work day.
- DO NOT USE
MURATIC ACID.
- Wash down with a mild
detergent five days after wall construction.
A test area is strongly recommended before
application. Supplier is not responsible
for wash down problems.
- Use low pressure spray
equipment.
- A
clear sealer is recommended after masonry
work is complete.
|
